Skip to content
Ombu Air
filling & capping
PRO TIP
Do not overfill your devices. Fill to the maximum level indicated below.
  • Step 1: Blunt tip needle in the center filling hole
  • Step 2: 90-135°F fill temperature
  • Step 3: Oil above 135°F floods the atomizer
  • Step 4: 1.05mL fill line
  • Step 5: Wait 8-10 minutes before capping
PRO TIP
Make sure to wait 8-10 minutes before capping to allow for saturation.
  • Step 1: Press the mouthpiece down vertically
  • Step 2: Do not use a hammer or mallet
  • Step 3: Do not press at an angle
  • Step 4: Check the pressure carefully
  • Step 5: You cannot remove the mouthpiece
  • Step 6: Let the device stand for 24 hours